You are logged in as a guest. ( Logon | Register Now! )



Who is the go to guy for Trolling Motor Pan install?
Jump to page : 1
Now viewing page 1
   Fishing Boats, Motors, Trailering, Q & A or Discussion

Posted by Gator
12/24/2018 11:58 AM
I am thinking of doing this, just want to be sure my boat has the room and want it done right. Any suggestions would be appreciated.
Boat is 2002 19ft 1 in. Stratos or 19 XL.

Edited by Gator 12/24/2018 12:48 PM
Posted by KYRick
12/24/2018 1:22 PM
check with DeepSink on here, he did mine and it turned out great
Posted by Aries 181
12/24/2018 3:01 PM
Call Johnny, you should already know that Ernie.

Bill
Posted by Corey
12/24/2018 4:47 PM
Ya I would check with Johnny before I did anything. But I had the same problem when I upgraded trolly motors I had to have a bigger pan an I ended up doin it myself it’s not to hard just make sure you measure twice an cut once
Posted by ditchdoc666
12/25/2018 9:41 AM
Mike Fitzgerald in Dayton did mine great work and good price and quick turnaround
Posted by Gator
12/25/2018 10:44 AM
I did ask Johnny some time back and he said he didn’t do that anymore. I’m wondering if cutting the hole will weaken my deck too much.
Posted by Aries 181
12/26/2018 3:47 AM
I installed mine Ernie and I'll bet your front deck is just as thick as mine, one inch. I actually stood on mine before screwing down the tray and there wasn't any flex at all.

Go ahead and have it done. Your back will thank you after standing there fishing all day.

Bill
Posted by WarEagleChatt
12/26/2018 3:33 PM
Deepsink did mine 3 yrs ago...did a great job...haven’t seen him around here much lately though.
Posted by FishingwithRusty
12/27/2018 8:46 AM
they are really not hard to do, ive done several. as mentioned above measure twice, cut once. look up into the front storage compartment to try and guage how far forward it goes(may end up cutting into the forward wall of it) and remove the bow panel and look/feel around under there to make sure there are no obstructions. ive done them on 2-3 stratos in the past, usually 3/4-1" thick deck with sprayed foam on the underside.

something to think about, if you have or will get an ultrex in the future, make sure the pan is wide enough as that is the widest foot pedal ive seen yet.
Posted by flyman
12/27/2018 10:17 AM
Check with silvertalon here on the forum he done mine reasonable price great work and fast
Posted by Gator
12/27/2018 12:26 PM
Thanks to everyone. I do appreciate the advise.

Edited by Gator 12/27/2018 12:27 PM
Posted by stockcarm14
12/29/2018 2:48 AM
I do them and in most cases can do them while you wait im in Dayton. 4232857467.
Posted by porthos33
12/29/2018 11:28 AM
Its the best decision you could make!
Spread the word

del.icio.us Digg Furl Reddit BB Google Ma.gnolia Netscape Simpy StumbleUpon Technorati Live Yahoo!

Jump to page : 1
Now viewing page 1
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread
 

Advertiser

Advertiser

CFF Calendar
March 2019
SMTWTFS
          1 2»
3» 4 5 6 7 8 9»
10 11 12 13 14 15 16»
17 18 19 20 21 22 23
24» 25 26 27 28 29 30
31            

Upcoming events (next 2 weeks)
Mar 24 Dream chasers Tournament #1 CFP

Advertiser

Random Photo
March 2016
Fivers

"March 2016 Fivers"
Album: fchupaska


(Delete all cookies set by this site)

Copyright © 1996-2019 All rights reserved.
Duplication in whole or in part of this Web site without express written consent is prohibited.
CFF Privacy Policy

Running MegaBBS ASP Forum Software
© 2002-2019 PD9 Software