'|
|
Member
Posts: 19
(75.216.184.231) | Anyone got a clue? I have a humminbird 150 depth finder on the bow of my boat and I use the universal sonar transducer built in to my Minn Kota Terrova trolling motor. The depth finder is powered from my cranking battery while the trolling motor is powered from a separate battery. The depth finder picks up and reads fine until I start the trolling motor, which causes the images on the screen to dim almost to a point to where you cant see anything. I have a brand new battery and on-board charging system, so I'm sure its not a power source problem. Any tips or info is greatly appreciated! | |
| | |
 Elite Veteran
Posts: 634
   Location: soddy daisy, tn (166.147.127.126) | There may be a setting to adjust the interference filter. ----- -Jason
1998 Fisher F18 FS Black/ White 150 Merc
usually Maverick, the Yellow Lab | |
| |
Jump to page : 1 Now viewing page 1 [25 messages per page] | | |
|