|
|
Member
Posts: 20
(204.116.51.61) | how do you tell a 2.4 and 2.5 200 merc and what years are thay |
|
| |
|
Extreme Veteran
Posts: 349
 
(76.127.28.181) | Check the serial numbers on the bracket that holds the engine to the transom then if you go online there are a couple of sights where you can put in the serial number and it will give you the spec.
-----
FTC/SS Wes Billings
US Navy Retired |
|
| |
|
Extreme Veteran
Posts: 536
Location: Chattanooga
(184.174.139.164) | What year is it?
-----
20XD Bullet white/red -- Merc 2.4 EFI Tuber
|
|
| |
|
Member
Posts: 20
(24.159.23.13) | ob242426 |
|
| |
|
Member
Posts: 42
(12.219.8.99) | Your Serial Number actually does not include the 0 so it would read B242426 which is a 1988 model motor. Not sure how to tell from the serial # if its a 2.4 or a 2.5 but i don't think the 2.5 came out until 1991. The cylinder blocks are different, there are some visual indicators maybe auburnwes of wrenchin 2 could chime in on that.
|
|
| |
|
Expert
Posts: 2900
Location: Dunlap Tn
(66.11.245.246) | The 2.5 did come out in 91. Can't really go by the seial on the mid as a 2.0L, 2.4, or a 2.5 will fit on the mids and I have swaped a ton of engines. The best way is to get the serial off the enigine block. Can't really go by sight as the 89-90 150 and 175 engines were basicly 2.5 blocks with 2.4 sleeves and were known as "fat blocks" and I am building one right now. Take a picture and post it and I might be able to shed some light on it.
-----
James Perry
423-304-0930 |
|
| |
|
Member
Posts: 20
(204.116.51.61) | k thanks |
|
| |
|
Veteran
Posts: 179
(198.134.212.201) | CALL PAUL NICHOLS |
|
| |
Home
Hall of Fame
2.5 merc
